Re: Q: Applied Engineering Sound Card

[lkhaider@concentric.net (Laer Haider)]

drsmooth@relex.com (Edhel Iaur, Esq.) wrote:

>On Tue, 18 Feb 97 02:23:52 GMT, jbiggar@firstnethou.com (James Biggar)
>wrote:
>
>>I set the port (2) to Your Card and have plugged headphones into the output 
>>jack and the earphone jack.  I do not get sound from either location.
>
>Some IIgs sound cards need to be connected to the motherboard via a
>few wires.  Is yours?

I don't believe you have to set port-2 to "Your Card."  You should be
able to wire the card to the Ensoniq sound connector on the IIgs
motherboard.  It's a 7-pin connector at the front of the motherboard
on the right side (as you face it), in line with the memory expansion
slot.  This should allow you to take advantage of the full stereo
sound capabilities of the Ensoniq and the IIgs.  Without this
connection, you don't have sound input into your sound card from the
computer.