"Tempest" <temp...@atariprotos.com> wrote in message news:a741ba9e-
321e-4915-9804-736dcb5f3...@b35g2000yqi.googlegroups.com...
On Jul 12, 11:45 am, "Bill Garber" <willy4...@garberstreet.com> wrote:> "Tempest" <temp...@atariprotos.com> wrote in
messagenews:c5d15ddb-
8e08-4c5e-8164-b30e356b3...@d37g2000yqm.googlegroups.com...
> On Jul 12, 3:31 am, mdj <mdj....@gmail.com> wrote:> On Jul 12,
> 1:48 am, MdntTrain <j...@cimmeri.com> wrote:
> > > Sounds like this changes the monitor from a 4-line RGBI input
> > > to 3-line RGB input -- which if digital would be 8 colors --
> > > but as the IIgs is analog out, and the monitor expects digital
> > > in, I wonder how the signal levels are dealt with.
> > The AppleColor Monitor 100 is actually an analog monitor to
> > which a RGBI digital converter was added. Flipping the switch
> > disables the the converter allowing the analog signals to flow
> > straight through.
> > Matt
> : So it works just fine as a IIgs monitor then?
> : I'm going to have to try that. How is the signal quality?
> According to the Apple II Compatibility Guide (P/N A2F2204),
> the AppleColor Monitor 100 is not compatible with the Apple IIGS.
> For the many owners of the AppleColor Monitor 100 who are
> upgrading their IIe's to the Apple IIGS, but who want to
> avoid having to purchase a new monitor, there is a workaround.
> Inside the AppleColor Monitor 100 on the main PC board, almost
> directly under the neck of the CRT, there is a slide switch
> labeled "16 color/8 color".
> To make the AppleColor Monitor 100 work with the Apple IIGS,
> set the switch to the 8 color position, and use the cable
> provided with the Color Monitor 100 (svc part # 590-0194-A)
> to connect it to the the Apple IIGS. This configuration makes
> all colors available.
> Apple Computer, Inc. takes no responsibility for any damages
> incurred, real or implied, that may result from this change.
: Right, that's the text of the article. What I want to know
: is how well does it work? I may have to just try it tonight
: and see for myself.
Of that I have no clue, so if you do, please, let us know.
Just to remind you of something you may have seen here at several
intervals in time, be careful of what you touch in there. Lots of
high voltage even with it unplugged for a few days. As a matter
of fact, I am not 100% sure, but I believe that I have heard that
it is safer plugged into the wall, as it provides a ground in case
you do touch something.
And, remember, one hand in the pocket prevents a complete circuit
between you and the other side of you. 8^)
Good Luck.
Bill