Re: ImageWriter // Question

[dalloff@freenet.columbus.oh.us (Dave Althoff)]

Nathan Mates (nathan@visi.com) wrote:
: In article <59fr4f$rrg@dfw-ixnews10.ix.netcom.com>,
: Tony Jones <arafel1@ix.netcom.com> wrote:
: > Will the ImageWriter // connect to the Super Serial Card or will I
: >need some other type of printer card?

:    It should work fine. [Make sure you also have a cable that connects
: the two, and both are set to the same baud rate, etc...]

One caution:  Since your SSC is sitting in Slot #2, it is very possible
that (assuming that this is a second-hand machine) it was configured as a
modem card.  Things to check--

Make sure that the arrow on the configuration block points to TERMINAL
(or get yourself a null-modem cable; changing the terminal block is cheaper)

Set the DIP switches on the card as follows for the IW-II:

(1=ON or CLOSED; 0=OFF or OPEN)
SW1: 1 2 3 4 5 6 7  SW2: 1 2 3 4 5 6 7
SW1: 0 0 0 1 0 1 1  SW2: 1 0 0 1 1 0 0

These are the SSC switch settings that Apple suggested in the IW2 owner's
manual.

--Dave Althoff, ][.
-- 
    /-\      Celebrating the International Year of the Roller Coaster
   /XXX\      /X\     /X\_      _     /XX\_      _     _        _____  
  /XXXXX\    /XXX\  _/XXXX\_   /X\   /XXXXX\    /X\   /X\      /XXXXX
_/XXXXXXX\__/XXXXX\/XXXXXXXX\_/XXX\_/XXXXXXX\__/XXX\_/XXX\_/\_/XXXXXX