Re: GSOS601 woes

[dempson@actrix.gen.nz (David Empson)]

In article <4t7ufv$9se@news.ysu.edu>, be404@yfn.ysu.edu (Adalbert Goertz) wrote:

>For some reason I start getting GSOS601 problems, like using
>jpegGS or jpegviewer.
>With the first I get message:
>Could not load/unload resource
>Type = 8028
>ID = E7C5D872
>Error = 1E06

Well, this error means that the system was attempting to load a resource
of type 8028 (rItemStruct, which is part of a menu definition).  However,
the resource ID is complete garbage (the maximum possible resource ID is
07FFFFFF).

I'd say that the program in question has a bug, or is suffering from
memory corruption.  There could be an INIT conflict, for example.  Try
running the program again after shift-booting (to disable all extensions).

If it is happening with more than these two programs, then I'd say you
have a damaged or buggy system file.  You should try shift-booting, and
then re-introduce the extensions one at a time until the problem
reappears.

If it still happens with several programs after shift-booting, then you
might need to reinstall your system software.

You might also have a hardware problem of some kind, such as faulty RAM,
or a flakey accelerator.

-- 
David Empson
dempson@actrix.gen.nz
Snail Mail: P.O. Box 27-103, Wellington, NEW ZEALAND