[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Color monitor with ][ Europlus
- Subject: Color monitor with ][ Europlus
- From: schregle@Pluto (Roland Schregle)
- Date: 1996/07/09
- Newsgroups: comp.sys.apple2
- Organization: Rheinische Friedrich-Wilhelms-Universit"at Bonn, Institut
Hello and help! :)
But seriously... I got an Apple ][ europlus and now I'm trying to hook it
up to a color monitor, only all output is dithered mono (configured for a
b&w display) on the composite output! There's no switch as on the //e to
configure it for color display, and the manual doesn't help either!
There's the auxiliary output (for the RF modulator?) 4-pin connector on the
upper right, and an unknown 2-pin connector below it (NOT the single pin
connector for the fixed level signal as mentioned in the manual). Then
there's a mysterious 4-pin connector on the bottom left which is not
documented or marked on the board. Infact, I think the manual is for the
original ][, not the ][ plus...
The board revision number is 820-0044-C. Anyone know how to configure it for
color?
GanjaTron