Sider HD system?

[jeff.brielmaier@yob.com (Jeff Brielmaier)]

RM>I have an ancient Sider drive (It works, but I dont know what size it
RM>is) which I think uses a MFM drive with a Xebex bridge controller with
RM>a card that fits inside the Apple.. My question is... How big of a HD
RM>mech can I put in this??

The orginal Sider drives (blue name plate) were either a 10 or 20 MB drive.  
On the Xebec controller card was a ROM that included the drive geometry of the 
attached drive.  As such, if your unit had a 10 MB drive you would need to 
replace w/ a 10 MB device of similar geometry.  If you have a 20MB device a 
Seagate ST-225 will work fine.

* KingQWK 1.05 # [PK] * SCULLEY:Angel Lucifer's corporate cousin & Pepsi drinkr

----
+------------------------------------------------------------------------+
|Ye Olde Bailey BBS Zyxel 713-520-1569(V.32bis) USR 713-520-9566(V.34/FC)|
|   Houston,Texas             yob.com           Home of alt.cosuard      |
+------------------------------------------------------------------------+