[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: New: Apple 2c: internal drive continuously spinning
- To: The Elfe
- Subject: Re: New: Apple 2c: internal drive continuously spinning
- From: "Polymorph" <polymorph@a2central.com.remove-i8v-this>
- Date: Sun, 2 May 2010 18:22:49 +1000
- In-reply-to: <Xns9D6BEC9CB6BCCPosteur@212.27.60.40>
- Newsgroups: comp.sys.apple2
- Organization: A2Central.com
- References: <Xns9D6BEC9CB6BCCPosteur@212.27.60.40>
- User-agent: Thunderbird 2.0.0.24 (Windows/20100228)
- Xref: g2news2.google.com comp.sys.apple2:17567
To: The Elfe
The Elfe wrote:
Thanks for your reply, Mike! I was a bit afraid when reading your 1.
line...
MSpangler spoke about "the apple II system hardware test disk", do you
know the correct name, in order that I may find it online (perhaps on
APPLE2. ORG.ZA)
I am a rockie: how can I lift carefully a chip?
Thank you for your help,
The Elfe
Does the fact that you are wanting to download a diagnostic disk mean
that you have a ROM0 //c - i.e. the first model //c that doesn't have
inbuilt diagnostics? You didn't mention if you'd tried to run the
inbuilt diagnostics as mspangler described.
But to answer you question, you can download Apple II diagnostic disks
from here:
ftp://ftp.apple.asimov.net/pub/apple_II/images/disk_utils/diagnostics
I'm not familiar with most of these files, but the file APTEST.DSK looks
like a good candidate to try first.
To lift chips, you can use an IC puller (available from any electronics
store), or gently prise up chips using a small jewelers screwdriver.
Prise up one end a little, and then the other, alternating in small
increments. Once the chip is raised sufficiently, gently but firmly push
it back down. If you feel uncomfortable doing this, I suggest you ask
someone who is more familiar, as you *can* easily break the legs off the
IC if not done correctly. Also, it is important to discharge any static
electricity in your body prior to touching any of the chips. Generally
grounding yourself by touching the power supply is adequate, but an
anti-static wrist strap is another option worth considering. Also
remember to turn off and unplug the computer prior to doing anything!
Good luck. Let us know how you go.
Cheers,
Mike