Need IIgs HD help...

[grubic@avicom.net (James Grubic)]

By putting together some parts of IIgs computers that our school district
had scattered all over the place, I managed to put together one with
extra RAM, drives, modem, and HD. The HD card was pulled from a "Woz"
special edition GS, and is manufactured by CMS. I put the card in a
machine which had some newer ROMs (1989). It is connected externally
to a CMS SCSI drive.

Since I'm new to the GS, I would appreciate whatever advice you can offer.
What slot should this HD card be in? How should I have the control panels
configured to boot from it? Are there some jumper settings on the back of
the HD and on the card that I should know about? I have System 6.0.1.

Please e-mail a response to the address below.

-- 
James Grubic "Golden Wolf"         |  Amiga*Macintosh*IBM*Commodore*Apple II
Microcomputer/Network Specialist   |        http://204.200.71.103/bps/
Bozeman Public Schools             |      http://www.grfn.org/golden_w/
isgrub@hawks.bps.montana.edu       |