[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GraphicWriter III v2.0
- Subject: Re: GraphicWriter III v2.0
- From: dempson@atlantis.actrix.gen.nz (David Empson)
- Date: 1996/03/16
- Newsgroups: comp.sys.apple2
- Organization: Actrix - Internet Services
- References: <4hb82r$qbm@gap.cco.caltech.edu> <4i46iq$3r4@cello.gina.calstate.edu> <4i4pea$2kn@gap.cco.caltech.edu> <4ibbg2$nvq@tuba.cit.cornell.edu>
In article <4ibbg2$nvq@tuba.cit.cornell.edu>,
Jay Krell <jmk3@crux4.cit.cornell.edu> wrote:
>
> On the Mac,
> It isn't too hard to send raw postscript to a printer, especially
> within a regular print job (It is actually difficult to do it
> outside a regular print loop).
I think the IIgs LaserWriter driver supports this as well. If I
remember right, you can include raw Postscript in picture comments
output during the print run.
The program would have to support this specially. Gary B. Little's
TextEdit-based editor (My Word) uses this method to output watermarks
when printing to a LaserWriter.
--
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand