Freakin' Second Sight Board

[colin.williamson@mdtnbbs.com (Colin Williamson)]

Hey all!
 
I just got my review Second Sight board in the mail today, and I can NOT get it
to work!!! Arrrgh! Sequential's tech line is closed for the holidays so here's
what my problem is:
 
I install the SS Board in slot 3 like the manual says (removing my VOC [Grr])
and pop Mr. RGB cable in, red cable side up. I plug in my RGB monitor, turn on
the machine and...
 
Pwing! I get a beep, then garbage. If I restart I get the "Apple IIgs" screen
and then it crashes into what appears to be the monitor. When it tries to boot
any disk drive it just bombs. I'm not a happy camper.
 
Here's what else I have in my system: A Quickie board, a Hyperstudio noslot
digitizing card, Sonic Blaster, Allison Digitizing board, 4meg Sequential RAM
board, Hispeed SCSI, and used to have a VOC.
 
If anyone can help, it would be *greatly* appreciated! I only have 30 days to
play with this until I send it back so I need to get cracking!
 
Colin

--
| Fidonet:  Colin Williamson 1:270/211@fidonet.org
| Internet: colin.williamson@mdtnbbs.com
| Standard disclaimer: The views of this user are strictly his own.
| From Mdtn_BBS  @mdtnbbs.com  [ In the Heart of Three Mile Island ]