Re: //c Printer cable

[mlamorte@freenet.columbus.oh.us (Mike LaMorte)]

J. L. Walters (bird@MCS.COM) wrote:
: I've looked through my files of "net wisdom" and cannot find where the
: printer cable for the //c is mentioned so I'm asking for help for a
: person that approached our Apple club. He has a //c and and IW2. What
: cable does he need?

: Would it be the same if his //c was really a //c+?

: Kind Regards,

: -- 
: 	Joe Walters:  bird@mcs.com or J.L.Walters@genie.com
: 	The sound of your horn is far sweeter if blown by somebody else.

Well, for starters, if it's a //c (not a //c+) he'll need a DIN-5 to
RS-232 interface cable. If you need the pinouts for the //c, I have the
Addison-Wesley TRM on it. (I dunno the pinouts for the RS-232, tho...)

If he has a //c+, the serial cable is a standard mini-din-8 like a Mac or
//gs. Just make sure it's a hardware handshaking cable and he should be
able to run at 14.4, LAP-M, v42, & v42bis with no problem.

-- 
Mike LaMorte <mlamorte@freenet.columbus.oh.us>
CEO, President, Designer
Aurora Concepts Inc.
Design & Consulting