Re: Second Sight Problem

[gachot@ulysse.enet.dec.com ()]

Hi From France,

	I was wondering that only RamFAST/SCSI S/N#4799 or Lower
	was not working with the SS card without an Upgrade ???.


The good news:

	I received yesterday the Second/Sight 24 Bits video card.
	I moved my TWGS 11Mgz from slot 3 to slot 4
	I plug the SS in slot 3
	The configuration of the SS is RGB (without the Jumper).

The Bad news or ???:

	I have a RAMfast REV D, ROM Rev 3.01b Cache 256. Serial 
	Number of the Card is #5581 (On the Card I have U6, U15,
	U17).
	Attached on the Card I have :

		ID4: CD Sony
		ID1: HD 100 Mg (Off Line)
		ID0: HD 100 Mg ( 2 Prodos Partition and 1 HFS).

	When I start-up the GS I hear that the HD is 'activated'
	for a very short time, but I get on the Screen 
	"Unable to Load Prodos". I also tried to boot the GS and 
	pressing the 0 key, but I still get "Unable to load Prodos".

	If I started from a Floppy. The IIgs boot and when I'm
	on the Finder the CVtechROM is on the Desktop. But I can't
	access the RAMfast Menu. By launching the applic.
	And One time I get a 'RAMFAST-SCSI Fatal Memory Fault
	code = 0C'.

	Is there a compatibility problem with my RAMfast. Should I
	upgrade it ?.


IIgs Configuration:

	IIgs ROM 01 - 4 Mgbytes
	Slot 1 : Sonic Blaster
	Slot 3 : Second/Sight card 24 bits
	Slot 4 : TWGS Upgraded to 11Mhz - 32 K cache
	slot 6 : RAMfast
	1 floppy 3"1/2


A question:

	Is it normal that the 50Hz option is not working with the 
	Second/Sight ?. I'm from France and the Option was available
	and not bad for the display ?.

	
Many thanks for any Help.
Regards,

				-Erik.