[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Is GS/OS 6.0.1 MS-DOS FST available?
- Subject: Re: Is GS/OS 6.0.1 MS-DOS FST available?
- From: erik@hypermall.com (Erik Kloeppel)
- Date: 1995/05/20
- Newsgroups: comp.sys.apple2
- Organization: Sequential Systems
- References: <3pirbr$o4t@newsbf02.news.aol.com> <3pitav$7su@crl6.crl.com>
- Sender: usenet@eskimo.com (News User Id)
In article <3pitav$7su@crl6.crl.com>, mpearce@crl.com (Matthew Pearce) wrote:
> Netco King (netcoking@aol.com) wrote:
> : I have a question regarding GS/OS 6.0.1. Is there a MS-DOS FST available
> : for GS/OS 6.0.1 which will allow the reading and writing of MS-DOS
> : double-density diskettes? Can Apple 3.5" 800K drives (non-UniDisk, of
>
> The MSDOS FST is read-only. There is a set of shareware utilities that
> allow you to write to MDOS disks.
>
Peter Watson's MS-DOS utilities should work on an Apple 3.5 drive...
> You will need a high density drive & the Apple 3.5" controler card.
OR
> Option two is to look into "bluedisk?" a card from ibm drives (I have
> only heard of this card. Someone else will have to fill in the deatails.)
The BlueDisk card is cool (Check GS+ V6. N5 for an in-depth review of
BD). It's a LOT less expensive than the FDHD (controller!, not to mention
controller AND drive). BD lets you use the MUCH less expensive PC-type
floppy drives on your IIGS. I set mine up for under $220 total - cables,
powersupply, card, and drives...
I LOVE it...
---------------------------------------------------------------------
Erik@hypermall.com - as a matter of fact, I DO speak for the company!
---------------------------------------------------------------------