Re: DMS Electronics RGV Color Card pinouts

[Steven Hirsch <snhirsch@gmail.com>]

Antony Mauget wrote:
> Hi all,
>
> I'm looking for the pinouts of the cable connector of the DMS Electronis
> Apple RGB Color Card.
> You can see a pictureof this card here :
> http://img199.imageshack.us/img199/4671/appleiirgbcard.jpg

I have a slightly different revision of that card here.  Mine has five 
plate-through holes in the upper right instead of the DIP socket.  They are 
labeled, top to bottom:

RED
GREEN
BLUE
OV (Gnd)
SYNC

There is bundle of wires about 10" long soldered in there, with a DB-25M on 
the other end:

Pin 2 ---
	|--Sync
Pin 4 ---
Pin 5 --- Green
Pin 6 --- Blue
Pin 7 --- Red

I have no clue what type of monitor connected to this.  The bottom right of 
the board has three holes:

14M
Vid
GR

A short piece of ribbon cable brings these out to a pair of machine-pin DIP 
sockets that are clearly meant to sandwich in between two of the motherboard 
ICs and their sockets.

Never been able to find a shred of information on this card.