[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ROM3 Upgrade
- Subject: Re: ROM3 Upgrade
- From: clay1@primenet.com (Clayburn Juniel/Effective Software Solutions)
- Date: 1995/05/06
- Newsgroups: comp.sys.apple2
- Organization: Primenet
- References: <3od6vr$klh@reuters2.mitre.org>
Frank R Petroski (petroski@mwunix.mitre.org) wrote:
: I have a ROM1 IIGS, with a whole bunch of stuff. I never thought about
: getting the ROM3 upgrade until last night when I started looking
: at using Appletalk to share a folder on a Mac I bought for the kids for
: Christmas (and share the printer too). It looks like I have to give up two
: slots on my ROM 1 System (Slot 7 and either 1 or 2 for the connector).
: But I had my Vulcan controller in 7, and I have an Appledisk3.5 using 5 and an
: Appledisk 5.25 in 7, and a direct connect printer on slot 1.
: It looks like with ROM3 I only have to give up slot 1 or slot 2. Is there
: anyplace where you can get the upgrade done anymore? What's involved?
: Is it just a ROM, or is it a motherboard change too?
I don't believe there is any upgrade to ROM3. To upgrade you have to buy a
ROM3. There are work arounds for the ROM1s though. I have a ROM1 and I
moved my hard disk to slot 1. Of course slot 7 is now Appletalk. I
don't have an Appletalk compatible printer so my printer is hooked up to
the modem port. Put so is my modem. I use a switch box to switch
between the two. I also have an Init called battery brain, that allows
me to call up the battery ram configurations to change from using the
modem port for printing or modeming. Another thing that helps is I have
a 8 meg ram card and my system disk is on RAM. It was put there by an
Init called 'First Start'. First Start was written by me and is
shareware and can be found at my FTP site as mentioned in my sig.
--
Clay
|-------------------------------------------------------------------------|
|Effective Software Solutions Clayburn W. Juniel, III |
|Custom Software Design 1928 E. Camelback Rd. #623 |
|Phone: (602)274-6905 Phoenix, AZ 85016-4143 USA |
|Fax: (602)274-6851 |
|Internet: clay1@primenet.com WWW: http://www.primenet.com/~clay1 |
| c.juniel@genie.geis.com FTP: ftp.primenet.com users/c/clay1|
|-------------------------------------------------------------------------|
- References:
- ROM3 Upgrade
- From: petroski@mwunix.mitre.org (Frank R Petroski)