Re: Pinouts needed for PCT->IBM keyboard.

[dempson@atlantis.actrix.gen.nz (David Empson)]

In article <3j26ft$fn6@usenet.INS.CWRU.Edu>,
Jason Thomas <fw060@cleveland.Freenet.Edu> wrote:
> 
> I have the right Molex connector, and I have a female 5-din connector.
> All I need new is the right pinouts, does anyone have the patch cord?

Yes - right in front of me.  (I got one with my second hand PC
Transporter, but never needed to use it.)

Using the same pin numbering as the IIc, the socket is numbered:

5           1
  4       2
      3

Pin 1 has a red stripe on the cable.  The shield of the DIN-5 is not
connected to anything.

The pins go to the molex connector as follows:
 ___________
|           |
| 4 2 5 3 1 |   The pins are closest to the bottom in this diagram.
 -----------

There is a white stripe along the bottom edge of the connector (in the
above orientation).
-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand