[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Ramworks 3 Info

Subject: Re: Ramworks 3 Info
From: dempson@atlantis.actrix.gen.nz (David Empson)
Date: Sat, 17 Dec 1994 04:34:07 GMT
Newsgroups: comp.sys.apple2
Organization: Actrix - New Zealand Internet Service Providers
References: <3cqse5$hh5@st-james.comp.vuw.ac.nz>
Sender: news@actrix.gen.nz (News Administrator)

In article <3cqse5$hh5@st-james.comp.vuw.ac.nz>,
Electron Microscope Facility  <EMF@vuw.ac.nz> wrote:
> I have a 1mb Ramworks 3 card with no manuals. Can someone give me info
> (calls for self test, manuals).

The RamWorks has no ROM, so there is no self-test built into the card.
Any self test and RAMdisk support is done using disk-based software.
The software is supposed to be supplied with the card, so you should
be entitled to a copy of it, if you can find someone who can send you
a copy.

The RamDisk support requires patching a replacment RAM disk driver
into ProDOS (unlike standard-slot-based RAM cards like the RamFactor,
which provide the standard ProDOS device driver interface in ROM).

References:
- Ramworks 3 Info
  - From: Electron Microscope Facility <EMF@vuw.ac.nz>

Prev by Date: Re: NEW! SCSI-2 CDROM Driver for Apple HiSpeed SCSI
Next by Date: Re: CDA access by NDA?
Previous by thread: Ramworks 3 Info
Next by thread: ][+encoder board wanted
Index(es):
- Date
- Thread