[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: RamFast troubles...
- Subject: Re: RamFast troubles...
- From: pete@pro-pete.cts.com (Pete Venezia)
- Date: Fri, 4 Nov 94 22:34:52 PDT
- In-reply-to: kmitchel@ink.org (KIRK MITCHELL)
- Newsgroups: comp.sys.apple2
- Organization: Pete's Place [pro-pete] Davis, CA 916 756-3761
It sounds like the code that RamFast writes to the disk has been corrupted.
Try rebooting, while holding down the 0 key, to get the RamFast configure
program to load from the card. Re-configure your hard disk, and turn on
"Rom disk." Then re-boot. Your drive should boot. If it does, copy
"RamFast" from the rom card, to your hard disk (replace the old one, if it
is there.) Good luck......
"Is this the Superhighway?" ================== Pete Venezia ============
Pete's Place: pete@pro-pete.ctc.com
| CSUS: veneziap@csus.edu
\ ` ' / Davis Community Network:
< 0 0 > psvenezi@wheel.ucdavis.edu
===oOO====( )====OOo====================================================