Re: RamFAST rev B v3.00h ROM and SCSI CD-ROM/Floptical

[sporadic <sporadically@gmail.com>]

On Jan 7, 9:51 pm, "Bill Garber" <willy4...@garberstreet.com> wrote:
> "sporadic" <sporadica...@gmail.com> wrote in message87f9f160-8f77-43c5-a418-2b6aca93fd13@j19g2000yqk.googlegroups.com">news:87f9f160-8f77-43c5-a418-2b6aca93fd13@j19g2000yqk.googlegroups.com...
>
> On Dec 25 2009, 3:07 am, sporadic <sporadica...@gmail.com> wrote:
>
> > So I'm pulling an all-nighter to tinker with the various IIgs goodies
> > that Santa brought me :)
>
> > quick updates:
>
> > 1. the TWgs is not stable @ 12 MHz (and yes, I ultimately cut the TC4/
> > TC5 bow ties to rule it out). It would hang within 10 minutes while
> > running Modulae, also it'd crash while sitting idle at the Finder
> > desktop. Running the continuous self test will eventually log a
> > Language Card error. Tried it on two different ROM 1s (one with a GS
> > RAM Plus 6MB and another with GS Juice+ 4MB).
>
> > 2. it is very stable @ 7 MHz (the original 28 MHz crystal) and also @
> > 10 MHz. I'm happy with 10 MHz/32K so I'm leaving well enough alone.
>
> > 3. Replaced the fan in the System Saver GS so it doesn't sound like a
> > dust buster anymore, and it moves crazy amount of air now!
>
> > Back to the RamFAST question: I have an old school rev B RamFAST with
> > v3.00h ROM (serial #0083). There are two stickers on the card, U15
> > V3.00 and U16 V2.01. I have an old Plextor UltraPlex 40max CD-ROM
> > (PX-40TSi) and also picked up a floptical driver off eBay, per Pitz's
> > suggestion. I'm booting off a MicroDrive in Slot 7, and the RF is in
> > Slot 1.
>
> > The Finder doesn't show either drives (I have media in both), and the
> > HS.FST is installed. RamFAST works with a SCSI HD and it can detect
> > the HD in the ROM utility. But the ROM utility can't detect either
> > device, it reports:
>
> > The following condition(s) and/or change(s) have been detected:
> > Incompatible configuration data.
>
> > Does anyone know if Rev B will accept the v3.01F ROM? ReactiveMicro
> > indicates it's for Rev D. Does anyone know if v3.00h ROM works with
> > SCSI CD-ROM/Floptical drives?
>
> > Thanks!
>
> > Jimmy
>
> :
> : While I wasn't able to get the RamRAST to recognize the CD-ROM, I'm
> : happy to report I picked up a HS SCSI from Gust and now I can use the
> : old Plextor SCSI CD with the GS! Still can't get the floptical to show
> : up so I'm suspecting I have a bad drive.  I hope the eBay seller can
> : find a replacement drive or give me a refund.
> :
> : Jimmy
>
> I am sorry to hear that, because, I also bought one of those flopticals.
>
> Bill Garber

Well, I'm sure they work, because pitz got one to work on his setup.
I'm hoping a replacement would work.


Jimmy