Re: Arrgh! Wrong TransWarp GAL's

[Dirk@gaga.maschinenbau.uni-dortmund.de (Dirk Froehling)]

In article <1994Sep6.005259.16887@pro-nsdapple.cts.com>,
gary@pro-nsdapple.cts.com (Gary Evans) wrote:

> Fortunately I already have the 2B, 4B & 8B GAL's
> HOWEVER I only have the _3D_ GAL.  

Same here. But I am running at 13.75 MHz for months now, without problems.

> Seeing as AE is now out of businees, where do I get on of these things?
> What happens if I plug in a 14mhz chip with the 3E chip?

Just try it. If it doesn't work, you can lower the speed by changing the
oscillator. Even 10 MHz will be better than 7 :) And now, with these low
prices for the 65816...

> Also, how do I tell how much cache RAM is on the card.  I know they could
> be had with an optional 32k cache, but the faq makes no mention of how to
> tell.

Look at the TransWarp CDA. There is a place where it shows the version number
and the cache size. I think you will need the 32k cache, since it uses faster
RAMs.

-- 
| Dirk Froehling - Germany, Uni Dortmund, FB Maschinenbau, LS Mechanik |
| dirk@gaga.maschinenbau.uni-dortmund.de            GEnie: D.FROEHLING |