Re: How to open composite monitor //e

[Silicon Sam <siliconsam@gmail.com>]

On Dec 30, 11:04 pm, hmbrew <hmb...@gmail.com> wrote:
> On Dec 30, 7:28 pm, A2Aviator <a2avia...@gmail.com> wrote:
>
> > IF this is the monitor ..
>
> >http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310190654713
>
> > ..two screws above that panel where the power cord goes in, two at the
> > top and I recall two somethings on the bottom.
>
> > That panel where teh power cord is, stays where it is. The top comes
> > off the power cord passes through.
>
> > There's nothing inside holding anything.
>
> That sounds mostly right. The two "things" at the bottom are screws
> pointing towards the front. That sounds like what's supposed to happen
> during disassembly.
> That is the same monitor I have. I was confused at first because the
> title says 2056, but the description says 6021, like mine.
>
> Do you mean to say that the panel that the cord goes through comes off
> with the back half and the cord slides through the narrow hole on the
> panel? It doesn't want to slide through there, but that might just be
> a result of being in there for so long.
>
> Alternatively, do you mean that the back cover comes off leaving the
> panel with the cord affixed to the front half of the monitor?
>
> Thanks, it sounds like we're making a little progress here regarding
> the assembly's configuration.

  Yes, the back cover comes off leaving the panel with the cord
affixed to the front half of the monitor.   It's been a number of
years since I had one apart, but that should be right.