Re: How to open composite monitor //e

[hmbrew <hmbrew@gmail.com>]

On Dec 31, 2:36 pm, Michael Black <et...@ncf.ca> wrote:
> On Thu, 31 Dec 2009, A2Aviator wrote:
> > Yes, the panel thats inset, there with the controls/video connector/AC
> > line cord stays right where it is. It is a separate piece from the
> > rear chassis cover. That is actually connected to the logic board
> > which is secured to the chassis. So if you've not removed those two
> > screws, this is whats lifting and giving resistance.
>
> > There will be a "mail slot" like hole in the rear chassis cover when
> > you lift it off.
>
> I did reference that, though not as well, in my post.  There's something
> like that on the Apple III monitor.  As I recall, despite the screw(s)
> it wasn't obvious until the cover wouldn't come off and I realized I did
> have to unscrew that piece.
>
>     Michael

Well it must be stuck, because said panel tries to remain attached to
the back cover when I lift it off. Maybe I can solve this with some
well-placed force. (But carefully)
I'm usually excessively nervous about forcing something when I'm
taking stuff apart.
I'll fiddle with it some more when I get home again tomorrow.