Re: Installing HDs in a GS

[schultp@aa.wl.com (Paul Schultz)]

Dan Brown (pro-newton!pro-dan!danb) wrote:
: tyoung@jove.acs.unt.edu (Phillip "Ty" Young) writes:

: >Anyone have any recommendations (i.e., DON'T) on trying to install a 
: >small (2.5") internal drive inside a GS, using some available +5/+12VDC 

:         chuckn@pro-nsdapple.cts.com sells a setup designed to do just that. 
: It takes up two card slots, but uses one only to power the drive (i.e., you
: can still use that port's function).  It's said to be very slick.

I just purchased this card from Memory Plus Distributors. The card holds
a 2.5 inch SCSI drive and has a bank of DIP switches for setting SCSI ID
and Termination. A cable goes from this card to your SCSI card. The card
alone costs $59. Shipping was $5. A SCSI daisy chain ribbon cable is an
extra $10. I don't have their phone number handy. I'll try to remember to
post it later when I get home.

Paul Schultz 
--
===============================
Internet: schultp@aa.wl.com
===============================