Re: Unloading CDAs

[jmk3@crux4.cit.cornell.edu (Jay Krell)]

 > There is a way to permanently tell the ROM 3 not to install Memory
 > Peeker and Visit Monitor.  I just don't know for sure what it is.  I
 > THINK there's a jumper for it on the motherboard, but I'm not
 > positive, so don't quote me on it. :)
 
Yes, there is a jumper. Quote me. Better yet, quote this:
 
Apple II
Technical Notes
_____________________________________________________________________________
                                                  Developer Technical Support
 
Apple IIgs
#30:    Apple IIgs Hardware Reference Updates
 
Revised by:    Jim Luther                                      September 1990
Written by:    Rilla Reynolds & Jim Luther                       October 1987
 
Chapter 6:  The Apple Desktop Bus
 
Second Edition--Page 148, after final paragraph
 
Add a new heading and description:
 
  Control Panel Control Jumper
 
  The ADB microcontroller provided with the 1 MB Apple IIgs includes an
  input that disables the text Control Panel (normally available via the
  Classic Desk Accessory menu).  This feature allows the system parameters
  to be set and then protected from changes made via the text Control
  Panel.  A jumper across the pins of connector S1 removes the text Control
  Panel from the Classic Desk Accessory menu.  All other installed classic
  desk accessories are still available in the Classic Desk Accessory menu
  when the S1 jumper is installed.  The S1 connector is located near the
  ADB microcontroller at motherboard location F12.
 
  Note:  The S1 jumper does not prevent the system parameters from being
         changed with the graphic Control Panel (a new desk accessory
         normally available from the Apple menu of the Finder or of any
         other application that includes the Apple menu).

--
 -- Jay, j.krell@cornell.edu