Re: high speed modem

[schaf@meadow.muc.de (Soenke Behrens)]

> I just got a Practical Peripherals 14400 fax/modem to attach to my GS.  I
> have the right cable, and it connects at 14400, but ProTERM doesn't
> register the connection.  It picks up OK at 2400.  BTW, I'm using version
> 3.0.  Which driver and what settings should I be using?

Use one of the highspeed drivers, like the Okitel 9600 CTS/RTS.
Also make sure you have a hardware-handshaking cable (see PT manual,
most modems have one, anyway, nowadays).

Then, in the dial entry, just set the baud rate to say 38,400 or such.
That should do it. PT uses the modem driver to determine the maximum speed
that the modem will communicate at, that's probably your problem.

Soenke
--
Decompression sucksssss
## CrossPoint v3.02 ##