[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Apple Ram Card
- Subject: Re: Apple Ram Card
- From: dempson@actrix.gen.nz (David Empson)
- Date: Fri, 29 Apr 1994 09:26:21 GMT
- Newsgroups: comp.sys.apple2
- Organization: Actrix Information Exchange
- References: <2phmgh$2pu@usenet.ins.cwru.edu>
In article <2phmgh$2pu@usenet.ins.cwru.edu>,
Auri Rahimzadeh <ek361@cleveland.Freenet.Edu> wrote:
>
> Also, don't put it in slot 3, since that is the slot used for the
> 80-column display, and don't put it in any slots that are mapped as hard
> drive partitions (such as with the RAMfast or Apple SCSI card with more
> than two partitions).
This only applies to the RamFAST, and only if you're using the
RamFAST's own re-mapping.
If you rely on ProDOS-8 2.0 or later to do the remapping, it will
only map the extra partitions/drives into slots which have no disk
devices (which includes a RAM card).
--
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand