[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Intrec info
- Subject: Re: Intrec info
- From: schaf@meadow.muc.de (Soenke Behrens)
- Date: 27 Apr 1994 22:33:00 +0100
- Distribution: usa
- Newsgroups: comp.sys.apple2
- References: <2pi4dj$rm3@charm.magnus.acs.ohio-state.edu>
> Sorry to ask this but I have checked the faq and can't seem to find the
> information. I bought a 14.4 modem but can't use it above 2400 baud. I am
> using Proterm 2.0. Is there any way to use it at 9600 baud or do I have to
> upgrade to 3.x? If so, does Intrec still have an upgrade price? Could you
Look for a driver that says something like "MNP" in it or "9600"
or whatever. The modem driver you chose determines the speed PT will use.
Since the lowest version I used was 3.0, I can't comment on PT's ability
to do that at 2.0. Anyway, 3.1 is well worth the dough.
Yours
Soenke
--
Decompression sucksssss
## CrossPoint v3.0 ##
- References:
- Intrec info
- From: rgoogins@magnus.acs.ohio-state.edu (Richard A Googins)