Re: RamFAST Woes

[bazyar@netcom.com (Jawaid Bazyar)]

Brian G Long <bl2y+@andrew.cmu.edu> writes:

>    I seem to get a totally random RamFAST error, typically a RamFAST
>    Memory Fault Code 0E or 0C.  Whenever it happens, the machine flops
>    into the monitor whenever the drive is accessed.  I also occasionally
>    get a Cable Bus or Termination error, but the cabls are tight and the
>    drive is terminated properly.  I am unable to reproduce this error and
>    it seems totally random, because I might not use my gs for two days,
>    turn it on, and immediately get this error.  Go away for a day or two,
>    come back, turn it on, and its fine for a few hours, or minutes, and
>    then it happens again.  No jostling of the computer or drive, no
>    temperature problems (I have a fan) and of course everything is shielded
>    and of sufficiently short length.  So, any ideas?  :)  Thanks...

  If you have a Revision C RamFAST, turn on DIP switch #1. If you have
a Rev D, make sure that you have the jumper in the upper left corner
connected.
-- 
 Jawaid Bazyar              |   Like UNIX? Like your Apple IIGS? Then ask
 Procyon, Inc.              |   me about GNO/ME for the Apple IIgs!   
 bazyar@cs.uiuc.edu         |   P.O Box 620334
 --Apple II Forever!--      |   Littleton, CO 80162-0334   (303) 781-3273