[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: HELP: 4 meg CVTech with Apple Memory card.
- Subject: Re: HELP: 4 meg CVTech with Apple Memory card.
- From: Tom O'Neill <tdon@delphi.com>
- Date: Sun, 30 Jan 94 23:36:35 -0500
- Newsgroups: comp.sys.apple2
- Organization: Delphi (info@delphi.com email, 800-695-4005 voice)
- References: <2id64u$cc1@vixen.cso.uiuc.edu>
In re your 4 Meg CV Tech board + 1 Meg Apple piggyback,
I talked with John at LRO on a couple occasions and he
informed me that the DMA has to be disabled on this board
forany config other than 1Meg, 2Meg, or 4 Meg (ie 3 Meg/no DMA)
and 5 Meg and above, no DMA. Check toh jumper setting for
the DA oops DMA, and disable it to use the 5 Megs.
Hope this helps. John is willing to help...of course, I had
made some purchases....
Regards,
Tom