Re: Carte Blanche to XILINX Platform Cable USB

[Steve <srkh28@gmail.com>]

Hi Red,

No worries - I cant seem to download the pic from here, but if it
looks 2mm, then thats the one.
Losing the PCB is the way to go for sure.

steve


On Nov 3, 10:07 pm, "RedskullDC" <redskul...@oohay.moc.ua> wrote:
> Hi Steve,
>
> "Steve" <srk...@gmail.com> wrote in message
>
> 5c31bdc3-a0b0-4617-b045-edab85b7fd7e@a39g2000pre.googlegroups.com">news:5c31bdc3-a0b0-4617-b045-edab85b7fd7e@a39g2000pre.googlegroups.com...
> ... I cant see the little PCB that adapts the Xilinx DL series JTAG
> adaptors 2mm header to the 2.54mm header - this is the tricky bit..
> unless its terminated with a 2mm female boxed header.. but, cant see
> it. Need a bit more info.
>
> Says it suits the XUP programmer above it. If you look at the blow-up
> pic of the programmer it has a 2mm Male socket on it.
> Fly leads must have a matching header to plug in to it...
>
> Could always email them to check I guess..
>
> Xilinx USB programmers only come with the PCB adapter thingy coz
> Xilinx were too cheap to buy proper headers...
>
> Red