[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Help Needed - Apple A9M0306 thermal
- Subject: Help Needed - Apple A9M0306 thermal
- From: <AUMLJ@ASUACAD.BITNET>
- Date: Sat, 1 Jan 1994 15:55:18 MST
- Newsgroups: comp.sys.apple2, comp.periphs.printers
- Organization: Arizona State University
- Xref: gmd.de comp.sys.apple2:37900 comp.periphs.printers:7479
I have just bought a used Apple "Thermal Transfer Printer" model #A9M0306
at a thrift shop so I don't have any documentation on it. The printer seems
to work to some degree depending on how the dip switch on the back is set.
Does anyone have a key to the switch settings of this printer or any other
helpful information on this printer? BTW, I'm using it with an Apple IIc and
Appleworks.
Thanks, in advance
---
========================================================================
Jonathan Massey Arizona State University
Department of Theatre Tempe, AZ
AUMLJ@ASUVM.INRE.ASU.EDU -or- AUMLJ@ASUACAD <><
========================================================================