[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: //c to Okidata printer

I have a manual for the grappler +. The switches are as follows:
                         1*   2    3    4
epson dot matrix prntr   off  on   on   on
panasonic kxp-1090       off  on   on   on
smith-coronad-100thru300 off  on   on   on
c.itoh 8510 ep           off  on   on   on
nec8023/c.itoh8510/prowrt off on   on   off
star gemini               off on   off  on
anadex printers           off on   off  off
okidata82a,83a,92,93,94   off off  on   on
okidata 84 w/o step II
graphics                   off off off  on
apple dot matrix          off  off on   off
ids/dataproducts  switch settings do not matter
when the + side of the switch isdepressed, or set to the right, the switch
is in the on position.
* switch 1 controls the MSB (most significant bit, or 8 data bit.
when the switch is in the on position (+) the MSB is NOT transmitted to the
printer. when the switch is in the off (-) position, the MSB is under software
control.
I can make a copy of this manual if you want me to leave e.mail at
jamess@prosol.cts.com

ProLine:  jamess@pro-sol
Internet: jamess@pro-sol.cts.com
UUCP:     crash!pro-sol!jamess