PCT Disaster

[astdm@acad2.alaska.edu]

I want to thank everyone who gave me info on trying to get my PC Transporter
working on a GS using a monochrome monitor.  I did have the cable that someone
described and I connected it to an RCA end and when I went to boot it up I
could not get anything to work (not even the GS to boot).  I pulled out the
manual to make sure I had everything hooked up right but I give up.  I bought
the PCT a while back and found out I needed an RGB monitor.  I only use it as a
RAM disk.  I have never gotten it to work.  In case there is a PCT genious out
there.  I am using a ROM 01 gs, PCT is in Slot 7, I have an apple 3.5 hooked to
the smartport and a CT-20c hard drive (a smarport hard drive made for the //c)
plugged into the 3.5 (daisy chain).  I know this is not the ideal setup but
when I sold off the //c I kept it.  Its the only HD I have now.  

To make a long story short, I plugged my Duo Transdrive into the PCT DB-19
connector, my 3.5 into that and tried to boot the computer.  It would not boot. 
At one time, I did have it booting and the transdrives constantly ran (months
ago) but I don't know what I did then that I am not doing now.  I really would
like to be able to use this but for the life of me I do not know what I am
doing wrong.  I have read through the manual time and time again.  I AM LOST!

I just reconfigured my computer to take the transdrives out.  If anyone can
tell me what I am doing wrong, please let me know.  I guess I am a vegetable
now so break it down slowly!  ;)

Thanks for all who provided input!