[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Mystery IIc RAM board
- Subject: Re: Mystery IIc RAM board
- From: aphelps@vicstoy.UUCP (Austin Phelps)
- Date: Sun, 28 Nov 1993 00:14:39 GMT
- Newsgroups: comp.sys.apple2
- Organization: vicstoy public access Unix, Orlando, FL
- References: <2cgdb9$j7@eis.ctp.org>
In article <2cgdb9$j7@eis.ctp.org> gachenb@temp.ctp.org (Greg R. Achenbach) writes:
>It is an Applied Engineering Z-Ram card, not Z-Ram Ultra, just Z-Ram.
>to know about that wire coming off the thing. What is it for? Is it
>necessary? Do I have to solder the thing onto the motherboard of my
>working IIc just to find out if the card even works? If so, where do
The clip go to Pin 2 on the TMG chip (it right under the disk drive).
The CPU goes in the socket on Zram and the MMU goes in below the CPU in those
hole (it not socketed).
--
\ Austin C. Phelps \ Internet:aphelps@vicstoy.oau.org
/ Lightning Strikes Here / UUCP: ucf-cs!vicstoy!aphelps
\ FutureNet #44 (407) 297-7288 FutureNet: #1@#44 or #2@#10
/ Apple II Forever / \ FidoNet: Austin Phelps@1:363/18