[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Programming Disk ][ Controller
- Subject: Re: Programming Disk ][ Controller
- From: wwebster@bnr.ca (Bill Webster)
- Date: Mon, 1 Nov 1993 13:45:31 GMT
- Followup-to: comp.sys.apple2
- Newsgroups: comp.sys.apple2
- Organization: Bell Northern Research
- References: <gregorya.751787932@marsh>
- Sender: news@bnr.ca (usenet)
In article <gregorya.751787932@marsh>, gregorya@cs.curtin.edu.au (Andrew
Gregory) wrote:
>
(stuff deleted regarding Apple II disk drive control))
i.e. I need to know
> exactly what happens when a soft switch is accessed, either
> immediately or some N clock cycles in the future.
>
> Andrew Gregory
>
> gregorya@cs.curtin.edu.au
I'd suggest finding a copy of Inside Apple DOS. It describes
everything you're trying to find.
Bill Webster (WWEBSTER@BNR.CA)