Re: Help! System 6.0.1 is trying to talk!

[dempson@swell.actrix.gen.nz (David Empson)]

In article <mark-141093111858@128.157.9.145> mark@trillian.jsc.nasa.gov (Mark Manning) writes:
> Actually, that should be APPLETalk.  But at any rate...
> 
> I installed System 6.0.1 on my //gs.  It's great!  Except for
> two little things which keep popping up.  One is the //gs
> says it can not make a connection with Appletalk.

Ah - you used "Easy Update" to install System 6.0.1.

For some reason, Easy Update installs one file from the AppleTalk
software, and it complains if AppleTalk is not enabled.

Go into your System:Drivers directory, and disable or remove the file
"SCC.Manager".  Note: do _not_ get this confused with "SCSI.Manager"!!

> The second is that it keeps wanting me to make the max/min memory for
> the ram card the same.

I haven't seen this one, but it is probably being generated by the new
RAM5 driver.  (I have a ROM 03, which doesn't have separate min/max
values for the RAM disk size, so the driver probably doesn't check.)

Do you have any INITs installed which check the Battery RAM for
changes?

Take careful note of when the message appears.  Is it only after a
cold boot (power on, or after a self-test), or does it happen on a
warm boot (ctrl-apple-reset) as well?
-- 
David Empson                                                               
dempson@swell.actrix.gen.nz                                                
Snail mail: P.O. Box 27-103, Wellington, New Zealand