Re: how can I remove the mother board from the GS?

[khym@wixer.bga.com (Dave Huang)]

In article <fmlinC7vFA0.Cw4@netcom.com> fmlin@netcom.com (Frank M. Lin) writes:
>If you've done it, please tell me how.

Take off the cover, take out all of your cards and the power supply.
Then, flip the GS over and release the three latches that are under
that little piece at the front where the power LED is. After getting
that piece off, look for these small beige latches that are hooked
through little rectangular holes in the motherboard... push those
back, starting from the ones near the front, while _gently_ pulling up
on the front of the board. After you release all of the latches, the
board should pop right out.

Hope this helps, and don't break your motherboard or do anything
unpleasant to it! :-)
--
Dave Huang
khym@wixer.bga.com