Re: Replacement GS PSU Internals

[Drew <goggledrew@gmail.com>]

On 15 Sep, 08:06, Polymorph <polymorp...@hotmail.com> wrote:
> On Sep 15, 4:18 pm, Drew <goggled...@gmail.com> wrote:
>
>
>
> > On 14 Sep, 23:20, Steven Hirsch <snhir...@gmail.com> wrote:
>
> > > A2Aviator wrote:
> > > > Get any open frame switching power supply that is 40W or greater, (40
> > > > being close to the OEM one) that fits within the dimensions of the
> > > > box.
>
> > > > There was a thread on here about a replacement Vulcan power supply
> > > > module, that will work.  It's a fairly common off the shelf part.
>
> > > > You need +5, +12, -5 and -12 DC.
>
> > > > The one in the InnerDrive had no -5, they "floated" (literally) a
> > > > regulator in midair inside the box and attached it to the -12 line.
>
> > > Yup, that would have been me.  The MeanWell (great name) PT-65B is what I used
> > > to restore a Vulcan GS.  It should fit the stock IIGS power supply case
> > > without incident.
>
> > > Available from Jameco Electronics for $29.95 + shipping.
>
> > > You will have to rig up a -5V regulator, but hopefully in a bit more robust
> > > manner than what Tony describes for the InnerDrive (that's sort of scary).  I
> > > used a 7905T regulator - also available from Jameco for a couple of bucks.
> > > That drops the -12V rail to -5V and provides the fourth voltage.
>
> > > The MeanWell is rated at 65W (72 with forced air cooling), which should be
> > > more than enough for even the most fully-loaded IIGS!
>
> > > Steve
>
> > > p.s. - While it does nominally fit the Vulcan case, you end up having to
> > > unsolder a few components at the AC input end and reorient them (some on their
> > > side, one choke airborne) using some bus wire and skill.  Very, very tight.
> > > This should not be a problem with the GS supply since it has more room.
>
> > Thanks everyone. I am in the UK, so will need to hunt down a supplier
> > here, which i doubt will be a problem.
> > Drew
>
> Drew,
>
> Funnily enough, searching for "MeanWell PT-65B" in Google turns up the
> MeanWell website (1st hit) which happens to be in the UK, so I'm
> guessing you'll have no troubles at all...  ;-)
>
> Cheers,
> Mike

yea have already requested a quote :), lets hope they come back with a
sensible price

Drew