Re: Need RamFast Rom upgrade!!!

[philip@utstat.toronto.edu (Philip McDunnough)]

In article <1993May12.155723.6061@nuchat.sccsi.com> glynnet@zero.cypher.com (Glynne Tolar) writes:

[ ]
>> 
>'ve not had any trouble with my RamFAST rev. D!  Works great.  As for your boot
>problem it is likely due to the fact you may not have boot blocks on the
>partitions you try.  Copy block 0 from your normal boot partition to each
>additional partition.  Also make sure whatever partition you try to boot from
>actually has something to boot (ie. boot block (mantioned above) and ProDOS
>(either PRODOS (p8) or PRODOS (GS/OS))  Get the picture.
>
>Sounds like you upgraded just to have the latest ROM.  3.01 just fixes a few
>minor problems with Syquest drives.  If you don't have one, well...

I am not sure what you mean by copying block 0! Won't installing GS/OS on 
a partition do this?
 
I have not upgraded, as I only just bought the board. I plan on adding either
a Syquest, Bernoulli, Floptical or OD to my systems. If 3.0L can handle them
then I'm easy. 
 
-- 
Philip McDunnough
University of Toronto
philip@utstat.toronto.edu
[Where sheep may safely graze...]