Re: AppleWorks GS v1.1 on System 6.0

[dlyons@apple.com (David A Lyons)]

In article <Psw93B1w165w@cybernet.cse.fau.edu> Philippe Benichou,
philippe@cybernet.cse.fau.edu writes:
> I get two errors will loading AWGS, but it continues just fine until
you 
> want to print. The first error is "A  DRIVER ..." is not found (please 
> note the two spaces as if it is looking for a name or something. The 
> second error is "A PORT DRIVER..." is not installed... but I did
install 
> IMAGEWRITER and PRINTER and PRINTER.SETUP and afew others that have 
> nothing to do with the printer (by the way, I have the ImageWriter II)
in 
> the drivers folder, of course!!!
> 
> Someone told me that it might be my control panel settings are wrong,
but 
> he looked at my control panel settings and he did see anything
obviously 
> wrong (BTW, I have Control Panel v2.0 if that's important at all)....

Did you check in the "DC Printer" control panel to see if your printer
and port driver are selected?  You have to re-choose your printer after
installing new system software.  ("DC" means "direct connect.")

When you say you "installed" ImageWriter and Printer and Printer.Setup,
do you mean you copied the files individually?  If so, I suggest you go
back and install System 6 using the Installer, in case you accidentally
have mismatched versions of something in the system.

David A. Lyons, Apple Computer, Inc.      |   DAL Systems
Apple II System Software Engineer         |   P.O. Box 875
Internet:dlyons@apple.com                 |   Cupertino, CA 95015-0875

My opinions are my own, not Apple's.