Re: HardDrive help NEEDED!!! PLEASE... I beg you!

[behrenss@Informatik.TU-Muenchen.DE (Soenke Behrens)]

philippe@cybernet.cse.fau.edu (Philippe Benichou) writes:

>I just formatted my hard drive (two partitions... 20 megs and 30 megs) 
>under ROM 01 system with 1.25 megs of RAM and Apple II High-Speed SCSI 
>CARD...  I just installed System 6.0 onto the first parition, but the 
>second partition does not appear... and as the System 6 loads, I get this 
>error "SCSI device required driver. Please install SCSI driver on boot 
>disk and re-boot system." I then hit return to continue loading! And only 
>the first parition shows up!  AND YES, I have put all the SCSI drivers in 
>the DRIVERS folder!!!! (Is there a list of SCSI drivers that should be in 
>the driver folder or any other files I should add ANYWHERE?????)

First, using the Installer for this type of thing would have made things
easier for you. Second, the Apple HS Card uses a decent driver scheme, i.e.
you have the SCSI.MANAGER that does all the low-level stuff and then the
different drivers. In your case, you only need SCSI.HD in addition to the
manager since you apparently don't have any other devices.

Anyway, next time around, use the Installer for such things :)

Soenke
-- 
===========================================================================
More than silver, more than gold, I need   !    behrenss@informatik.
electricity. I need it for my dreams.      !    tu-muenchen.de
(RACTER)                                   !  FIDO: 2:246/13 Soenke Behrens