[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Booting SCSI Partitions

Subject: Booting SCSI Partitions
From: scraft@trident.usacs.rutgers.edu (Steve Craft)
Date: 31 Mar 93 20:19:54 GMT
Newsgroups: comp.sys.apple2
Organization: Rutgers Univ., New Brunswick, N.J.



Hey all.  I have a 42meg SCSI attached to the Apple HighSpeed SCSI
card in slot 7 on my GS, and want to boot my /AUX partition.  However,
its mapped as slot4, drive1, and that's only when I have GSOS (ie SCSI
part driver/manager) loaded.  I figured I could do a disk copy (its
832k) from floppy to it, and boot it so "full-disk" programs would
loasd fast.  How can I do this?  Only slot7, dirves 1 and 2 come up if
I boot ProDOS8.

scraft@gum.rutgers.edu

Follow-Ups:
- Re: Booting SCSI Partitions
  - From: pbauer@athena.mit.edu (Paul H Bauer)
- Re: Booting SCSI Partitions
  - From: jmk3@crux3.cit.cornell.edu (Jay Krell)
- Re: Booting SCSI Partitions
  - From: lorend@pro-scat.cts.com (Loren Damewood)

Prev by Date: Re: Sounds during boot
Next by Date: Filetype $50 question
Previous by thread: Re: New Dr. Tom Disk Mag
Next by thread: Re: Booting SCSI Partitions
Index(es):
- Date
- Thread