Re: v42bis modem, IIGS, and Proterm?

[behrenss@Informatik.TU-Muenchen.DE (Soenke Behrens)]

pirmann@athos.rutgers.edu (David Pirmann) writes:

>I recently bought an ATI 9600 etc/e modem, that has v.42bis
>compression.  However, I cannot get it to operate at speeds above 9600
>because it insists on "Hardware Flow Control" being enabled.  Does the
>GS support this?   I only have Proterm 2.1-- should I upgrade it

Yes. PT3 knows about flow control, fast modems, and has working (soso)
ZModem. 

>Also, how do I tell the serial port that I might want to operate at
>38.4K baud?  Can the GS go this fast?  What about 19.2K?

By setting the connection rate in PT3 to 38,400. With a little patch, PT3
will even do 57,600 (on a GS, that is).

Soenke
-- 
===========================================================================
More than silver, more than gold, I need   !    behrenss@informatik.
electricity. I need it for my dreams.      !    tu-muenchen.de
(RACTER)                                   !  FIDO: 2:246/13 Soenke Behrens