[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: On the topic of SSC baud rate generators...
- Subject: Re: On the topic of SSC baud rate generators...
- From: sknkwrks@sonny-boy.cs.unlv.edu (Scott Alfter)
- Date: 06 Jan 93 07:04:33 GMT
- In-reply-to: badbunny@tfsp.saic.com's message of 3 Jan 1993 18:27:02 -0600
- Newsgroups: comp.sys.apple2
- Organization: Skunk Works Software Co.
- References: <9301040027.AA19389@deepthought.cs.utexas.edu>
- Sender: news@unlv.edu (News User)
In article <9301040027.AA19389@deepthought.cs.utexas.edu> badbunny@tfsp.saic.com (Brendan Hoar) writes:
> The 8116 baud rate generator hip work fine, I use them alot.
> Its a 18 pin device. Hang a 4.915200MHz or a 5.068800MHz crystal
> of it with a dip switch and its done, easy. The out put is 16x
> the desired baud rate. The parts can be ordered through Jameco
> in Belmont CA. 1-800-831-4242.
> Any questions just ask.
Keep in mind, though, that Jameco has a fairly stiff minimum-order
requirement. I'd try finding the parts someplace else first.
_/_ Scott Alfter Internet: sknkwrks@cs.unlv.edu
/ v \ Call the Skunk Works BBS today! Ask me about SoftDAC--digital
(IIGS( (702) 894-9619 300-14400 V.32bis audio for your Apple IIe/IIc!
\_^_/ --==## "Apple II Forever" is a trademark of Apple Computer, Inc. ##==--