Re: Apple II Graphics Programming (Assembly)

["Michael J. Mahon" <mjmahon@aol.com>]

Polymorph wrote:
> On Jul 8, 10:27 am, "Michael J. Mahon" <mjma...@aol.com> wrote:
> > cerebral_monkey wrote:
>
> > > CLEAR  EQU     $F2F3
>
> <snip>
>
> > Page zero location $E6 must be preset to the graphics page you
> > are clearing: $20 for HGR1 and $40 for HGR2.
> >
> > $F2F3 clears the current page to black, but you can set the page
> > to any color by placing a "color byte" in the A register and calling
> > $F3F4, or by setting $1C to the desired color byte and calling $F3F6.
>
> I'm no assembly programmer, but looking at the Beagle chart (and A2
> FAQ), it would seem you both have made the same typo -  isn't the
> correct address to call $F3F2, *not* $F2F3?

You're absolutely right.  I read the later entry points off the listing,
but copied the first from the question--they are all adjacent.  ;-)

-michael

NadaNet 3.0 for Apple II parallel computing!
Home page:  http://home.comcast.net/~mjmahon/

"The wastebasket is our most important design
tool--and it's seriously underused."