Re: AE datalink 2400 modem cable...

[rhohler <rick.hohler@gmail.com>]

On Mar 22, 4:25 am, Nama <forums6...@mac.com> wrote:
> I got a AE Datalink 2400 modem cable with some apple II stuff
> recently, however it is missing the cable (and Manual). It is a REV C
> board and it has a 6 pin header connecter at one end that I assume is
> where the cable attaches. would anyone happen to know the pinouts for
> the cable so I can build my own?
>
> Or, does anyone know where I can find a manual for the datalink 2400
> online.
>
> Thanks again
> Philip

I looked through all of my stuff.  I found the manual for the Datalink
but didn't find the Datalink 2400 manual.  I scanned a few photos of
my Datalink 2400 cable.

http://picasaweb.google.com/rick.hohler/AEDatalink2400Cable?authkey=Gv1sRgCOOHxOfhlOfcZQ#

It might not be very helpful though.  I tried to take the plastic
cover off but it wouldn't come off.  At the phone connector side of
the cable, inside the plastic enclosure is a small (~1/2" X 1-1/4")
circuit board.  On the board is more than just a straight wire (from
Datalink) to RJ11 wire connection.  And a ground wire.

Might be easier to snag one off of ebay.  ;)

Rick