Re: ssm aio interface

[linemanduke@gmail.com]

On Jan 28, 3:24 pm, a2avia...@gmail.com wrote:
> Based on what I see, and remember on those cards ..
>
> I wouldn't hesitate to take a 26 pin ribbon and connect it right to
> the card, like the ribbon on a CMS or RAMFast, and then a DB25 male to
> male straight and give it a shot. Since the connectors are labeled
> modem/printer, like the other A2 cards before and after this one,
> instead of DIP switches, it's move the cable instead.
>
> The printer, go straight from Pin 1 to Pin 1 on a centronics crimp on
> like the Grappler Plus uses.
>
> The printers were 36 pin, but nearly every card used 26 pins or less.
> Some had as few as 16. Shared all the grounds.  but 26 pin IDC to
> crimp down ribbon is the simplest from a manufacturing standpoint.
> Everything can be made straight with no cutting, flipping, eliminating
> of cable leads, etc.

ok ill give it a try.

 what im trying to do is see if i can use this card instead of the
super serial card to run adtpro. audio transfers are just to slow.