[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
CM8833-II / CM11342/05G Monitor
- Subject: CM8833-II / CM11342/05G Monitor
- From: Drew <GoggleDrew@gmail.com>
- Date: Thu, 13 Nov 2008 16:38:05 -0800 (PST)
- Complaints-to: groups-abuse@google.com
- Injection-info: x16g2000prn.googlegroups.com; posting-host=195.166.151.25; posting-account=idkvAQoAAABAEGGO1HvMsaQZ-zZxSlSp
- Newsgroups: comp.sys.apple2
- Organization: http://groups.google.com
- User-agent: G2/1.0
- Xref: g2news2.google.com comp.sys.apple2:13907
Hi,
After a bit of help again :-). I managed to pick up a Philips CM8833-
II monitor today and was wondering if i needed to do anything special
to get it to work? I did do a search of the forums but didn't find
anything specific. Looking at the pinouts it would seem I should be
able to use the cable I have for my Commodore 1084s, but when i use it
the picture just rolls i.e not in sync.
The cable I made for the 1084s is cabled as per the faq and i get a
stable picture on my 1084s monitor...though red isnt very good.
The only information i have found on the pinouts for the philips
monitor are:-
1,2 - Ground
3 - Red
4 - Greem
5 - Blue
7 - Status RGB
Any suggestions?
Many thanks
Andrew