Re: NadaNet for the //c - just an idea

[mdj <mdj.mdj@gmail.com>]

On Aug 26, 1:51 pm, BLuRry <brendan.rob...@gmail.com> wrote:
> > > The good news is that it now appears that WRPROT will do the
> > > job as long as the state machine is left in the "shift in
> > > WRPROT" mode.
>
> > It's worked fine for me in the past, but then, I wasn't attempting to
> > use anywhere near the bandwidth nadanet requires (ie. flat out!)
>
> What about the serial port?  Can you just use the DSR (pin 5) for
> input and DTR (pin 1) for output?

I wouldn't know if they were configurable at that level - I've always
been a well-behaved programmer and used the firmware interfaces,
despite their reputation for being awful

Matt