Re: apple pascal can't load?

[mdj <mdj.mdj@gmail.com>]

On Aug 6, 8:08 pm, hong <jun.hj182...@gmail.com> wrote:
> when i use applewin to emulate apple II machine. i decided to run the
> apple pascal, i downloaded it from mirrors.apple2.org.za. it contains
> 4 disk images. and when i loaded the first disk in applewin and run
> it, i only got this error "no file system.file".i googled ,discovered
> the apple pascle maybe needed an "apple language system card ",and i
> can't find out where to download the rom or disk image.so can anybody
> here tell me what i did wrong?

The disks of Apple Pascal have the volume names APPLE0: through
APPLE3:

APPLE0: Is used as a startup volume for single drive machines. The
idea is that you boot with APPLE0: then replace it with APPLE1: and
press reset. This causes the p-machine to re-initialise. Unfortunately
due to a (IMHO annoying) design change, this will only work on an
Apple II or II+ not later machines.

For a two drive configuration, you should insert APPLE1: in drive 1
and APPLE2: in drive 2. This is probably where you're going wrong.

APPLE3: Contains sample code and some of the system utilities (Disk
formatter, the "librarian" which installs UNITS into SYSTEM.LIBRARY,
etc)

Hope this helps,

Matt